Medical isolation shoe cover (B) is also one of the important isolation tools. It is mostly made of polypropylene, which is breathable and waterproof. It is not easy to be damaged. The shoe cover is divided into short tube and long tube, which can wrap the socks and trousers of medical staff. Isolate them together to reduce the infection of germs by medical staff, and prevent medical staff from bringing dirt and dust on shoes and trousers into the quarantine area, causing pollution.

Medical isolation shoe cover (B) product performance

1.Medical isolation shoe cover (B) should be free of mildew, and no defects such as impurities, adhesion, cracks, breakage, etc. are allowed on the surface; if the isolation shoe cover is sewn, the sewn part should be firm, neatly formed, and uniform and straight stitches. , There are no defects such as skipped stitches and missing stitches. If heat-sealed, the heat-sealed part should be firm, neatly formed, and flat without cracks; the stitch length should be no less than 6 stitches per 40mm.

2. The size of the medical isolation shoe cover (B) should conform to the size of the package label, with a tolerance of ±10%;

3.Medical isolation shoe cover (B) The water level of the outer side should not be lower than the level 2 requirement.

4. The breaking strength of Medical isolation shoe cover (B) is not less than 10N in the longitudinal direction and 4N in the transverse direction.

5. The elongation at break of the Medical Isolation Shoe Cover (A) material should not be less than 10%.

6.Medical Isolation Shoe Cover (A) material tensile strength (vertical and horizontal) should not be less than 10Mpa.

7. The elongation ratio of the elastic band used in the medical isolation shoe cover (B) should be ≤1:1.7, and the tensile elastic recovery rate should be ≥75%.

8. The weight of the non-woven fabric used in the medical isolation shoe cover (B) shall not be less than 15g/m2; the thickness of the film used in the type I isolation shoe cover shall not be less than 0.01mm.

Medical isolation shoe cover (B) is not only good in isolation, but also of good quality. It can wrap all the socks and trousers of medical staff to achieve the effect of sealing and isolation. It has good waterproof effect, wear resistance, corrosion resistance, tear resistance, and Peeling performance, not easy to wear, good air permeability, solves the problem of airtightness of plastic film shoe covers.